Description
Automatic blast device with rotary desk and rotary suspension hook is suitable for the transport and adjustment of the part surface with dry surface, without grease and oils.
- Removal of scale, carbons, corrosion, burrs, flashes, shells, paints
- The preparation before varnishing, anodizing, gluing, rubber coating
- Cleaning the casting, moulds for pressure casting, glasswork, rubber factories, etc.
- shot peening
Benefits of device
- Production rate – the device is more productive than other common jetting devices (the effect of secondary impact of the abrasive substance on the adjusted product after its reflection from the manganese chamber lining)
- Quality – the quality of blast surface is higher due to even blasting
- Simplicity – blasting is simple for operation
- Multipurpose – the blasting on the desk or the hinge
- Maximum chamber accessibility for loading the blast product with the crane or forklift
- The regulation of the clean abrasive substance flow
- Simple inspection of dust separator contamination
- blast beam adjustability
- Blast performance measuring (ammeter)
- Device installation on the floor without required foundations
- Simple maintenance of blast chamber
Technical parameters
| Blast device type | RT 1D1000/OP2SF | RT 2D1500/OP2SF |
|---|---|---|
| External device dimensions – closed door (w x d x h) | 1875 mm x 2100 mm x 4310 mm | 2372 mm x 2565 mm x 4310 mm |
| External device dimensions – open door (w x d x h) | 3870 mm x 2100 mm x 4310 mm | 4371 mm x 2565 mm x 4310 mm |
| Desk height | 760 mm | 776 mm |
| Rotary desk diameter | 1000 mm | 1500 mm |
| Rotary desk maximum load | 1000 kg | 2500 kg |
| Maximum work height of the products placed on the rotary desk | 750 mm | 1000 mm |
| Revolution speed of the rotary desk | 3 ot.min-1 | 3 ot.min-1 |
| Number of spinning units | 1 | 2 |
| Diameter of spinning units | 350 mm | 350 mm |
| Drive unit of one spinning unit | 7,5 kW | 7,5 kW |
| Blast amount of abrasives for one spinning unit | cca 6550 kg.h-1 | cca 6550 kg.h-1 |
| The consumption of abrasives for both blast units | cca 2 kg.h-1 | cca 2 kg.h-1 |
| Cleaning of abrasives | Air separator | Air separator |
| Dust separator type | integral OP-2-SF | integral OP-2-SF |
| Cleaning of filtration cartridges | Automatic cleaning using return air pulses | Automatic cleaning using return air pulses |
| Electrical input installed | 13 kW | 20 kW |